• Control 80 fixtures up to 40 channels each (1024 channels)
• 600 Scenes/Chases
• Each chase can store 600 steps
• Easy to use Shape generator
• Intelligent jogwheels
The Creator Moving Light Controllers are the most affordable controllers with a...[more]

• Control 200 fixtures up to 40 channels each
• 150 Scenes/Chases
• Each chase can store 600 steps
• Easy to use Shape generator
• Intelligent jogwheels
The Creator Moving Light Controllers are the most affordable controllers with a very high...[more]

The EZ KLING™ is an RJ45 to DMX, KlingNet™, Art-Net™, and sACN interface, which allows you to pixel map KlingNet™ and DMX compatible fixtures through the KlingNet™ mapper included in Media Master Express™ (not...[more]

• Control 96 fixtures up to 40 channels each (1024 channels)
• 60 Scenes/Chases
• Each chase can store 600 steps
• Easy to use Shape generator
• Intelligent jogwheels
The Creator 1024 can control up to 96 fixtures.
It is easy to setup due to USB...[more]

• Gigabit datalink
• 8 Universes
• Artnet in and output
• Two DMX Modes (Standard and High speed)
The new Node-8 MKII is the updated model of the previous Node-8. The Node-8 MKII offers Gigabit datalink as well Artnet in and output. The Node-8MKII...[more]

Volt: 230 V / 24 V
Ampere: 22,0 A / 480 W
Dimensions: 295 x 130 x 43 mm

MIDICON-2™ is a professional USB powered controller which can be used to control lighting, video or audio software and/or hardware using Midi protocol. A Midi Mapper Software is provided, to assign Midi channels and notes to each button, fader or...[more]

A complete and easy to install light-control solution. That's what the Showtec LightBrick is about: a DMX 512 4 channel dimm- and switchpack! Perfect for fixed installation or rough on the road use.


• 4 channel dimmingpack with 512 available DMX...[more]

One channel DMX Dimming/Switch Pack
• 512 DMX-channels
• Wall / Truss mounting
• 50 mm dimming slider
• Dim and switch
• Dimming pre-set
• Dimming limit
• Capacitive load 10A, Inductive load 5A.


Voltage: AC 230V-50 Hz (CE)
Channel-Output: 10A...[more]

wireless DMX transmitter and receiver
Central sound-to-light transmitter


The W-APE wireless DMX transceiver is the central transmitter station to control ape labs products wireless via DMX.
.
The device can be operated in different modes:

...[more]

The Single 3 is a one channel DMX dimmer which easily can be mounted to your fixture, this will make it directly dimmable by DMX. It has both Dim- and switch mode. Furthermore, it is possible to set a maximum level for the output. The Single 3 can be...[more]

The ADJ WiFLY EXR QA5 IP is an IP65 outdoor rated compact Wash Fixture with ADJ’s WiFLY Transceiver with wireless DMX built-in. It offers the power of 5x 5-Watt RGBA Quad LEDs (Red, Green, Blue & Amber) to create rich hues and smooth color ...[more]

• Quick Lock Mounting
• Die-Cast Moulding
• High-Speed Frequency Hopping
• Less Than 5ms Latency
• Supporting the 2,4 and 5,8 GHz frequency bands.

The W-DMX? BlackBox series is an industry leader for Wireless DMX and RDM control, packed into a...[more]

IP65 Power extension cable for WiFly EXR Series

IR Remote for CW/WW/A Pars or Bars

Compatible with :

Flat PAR TW5
Flat PAR TW12
Pinpoint Go
Pinpoint Go TW 

Specifications
- Light Source: IP65, Outdoor Rated, par fixture with 12x 5-Watt QUAD LEDs (4-in-1 RGBA- Red, Green, Blue & Amber LEDs, rated at approximately 50,000 hrs)
- 4-button DMX Menu display on rear
- Built-in WiFLY wireless DMX: compatible with...[more]

The D6-Branch is a 6-way DMX-Splitter that can be directly mounted
onto truss with its integrated hook and loop fasteners or by clamp.
- 6-way DMX Splitter/Booster
- Can be mounted directly onto truss
- 1 x 3-pin DMX In/Out on the Front
- 6 x 3-pin DMX...[more]

It’s time for a Scanner revolution! With it’s compact size and light weight, the ADJ Inno Pocket Roll is an ideal lighting effect for any mobile entertainer, small nightclub, bar our lounge and for Bowling and entertainment centers. This ...[more]

• Calendar function
• 16 programmable scenes/chases
• Optical isolation at DMX output
• DMX input for external fader desks
The Quick DMX Rack is a standalone interface which can store 16 different chases or scenes. This makes the unit very suitable...[more]

The Inno Pocket Spot is a mini Moving Head with a bright 12-Watt LED source. Its compact size and light weight makes it ideal for mobile entertainers, small club and bars, roller rinks, bowling centers or any mobile production.

Featuring 7 colors plus ...[more]