The OMNITRONIC MZD-860 is a matrix zone distributor of 6 inputs for units with line level (e.g. CD player) and microphones (also phantom-powered) which are freely assignable to each of the 6 outputs. A further stereo line channel connects four units with...[more]

The COM-ART is a PLL UHF wireless audio set. It contains one transmitter and one receiver. The smart and lightweight design enables you to plug the receiver directly on any amplifier or active speaker. Both transmitter and receiver can be powered by one...[more]

6-zone audio amplifier with matrix assignment, 2 x 50 W / 4 ohms per zone

• 6-zone stereo amplifier for multi-zone PA applications
• Updated version with touch pad wall controller
• 12 x 50 W/4 ohms per zone
• Bridge mode with 100 W/8 ohms individually selectable
...[more]

The AN-31 XL serves for realtime analysis of acoustic signals received through either the supplied measurement microphone with cardioid characteristics or any other microphone or line in connection. The analyzer divides the frequency spectrum from 20 Hz...[more]

OMNITRONIC MLM-81 mixes up to 8 mono input signals to one output. Via individual level and tone controls, the different sources can be controlled and perfectly dovetailed. The MLM-81 is not only suited for panel discussions or symposiums but for press...[more]

The DLM-26 has excellent technical specifications. It provides in- and output gain and many other useful functions. It also has an excellent price / quality relation.

Input Section
Input Impedance:10 kilo-Ohm,
electronically balanced
Maximum Input Level:+20...[more]

1-channel low-noise microphone pre-amplifier for mains or battery operation
1 microphone input, XLR, sym.
amplification 11-stage 20-70 dB
LED green / red for operation / Peak
Phantom power +24 V switchable
Microphone phase shift switchable
Lo-Cut...[more]

The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio...[more]

Digital stereo active crossover with 2 inputs and 6 outputs, incl. software

• Flexible routing configurations for all standard mono and stereo output operating modes
• 2 analog inputs and 6 analog outputs (XLR)
• Active frequency filter types (Bessel, Butterworth
...[more]

LCD digital display
• Analog bar indicator
• Wide dynamic range
• Auto/manual range
• Fast/Slow response selectable
• Max. value Hold function
• A/C weighting selection
• Date and time display
• AC/DC auxiliary output
• Backlight
• Low power...[more]

Mass separation filters in small design, to avoid signal disturbances and rumble loops, which can occur, for example, when connecting PC sound cards or notebooks to amplifiers
Galvanically isolated inputs and outputs
2 RCA jacks
2 RCA plugs
Input /...[more]

The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio...[more]

The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightship in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this...[more]

The ADI-200 active DI box will help you with instruments that have a low level and high impedance output. It will convert the output to a more suitable signal without interfering or modifying the signal. With the ADI-200 your signal can be driven up to...[more]

The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio...[more]

This little and maybe even a bit mousy looking box, which demands one height unit only, is truly an effective signal distributor, which splits 2 input signals to 4 in stereo mode and spreads 1 input signal to 8 exits in mono mode. As the SD-28 is...[more]

Practical distributor with 1 input and 6 outputs

• Extends every mixer with additional outputs
• 1 stereo XLR input
• 6 stereo zone outputs (XLR)
• Each zone with level control and mono switch
• LED display of signal input and mono/stereo mode
• Rack installation with 1
...[more]

Stereo headphone amplifier
4 separate headphone amplifiers in one housing
One level controller per amplifier
6.3 mm stereo clipping input
6.3 mm stereo jack outputs

Specifications:
Type: Headphone Amplifier
Frequency range: 20-20000 Hz
Control...[more]

MCS-1250 MK2 touch pad wall controller

• Wall controller with touch-sensitive surface (touch pad) for amplifier MCS-1250 MK2
• LCD with blue backlight for monitoring the zone settings
• IR receiver
• Allows selecting and adjusting each zone individually: audio
...[more]

IR remote emitter for MCS-1250 MK2

• Operate your audio/video equipment in other rooms with your existing remote control
• The MCS-1250 MK2 wall controller picks up the signal from your remote control and the IR emitter sends the signal to the A/V
...[more]